FROM WRIST TO HANDHELD
How RePodCase Works
Choose a case made for your watch size and model, then follow the fitting instructions for that build. RePodCase changes the form around the watch, not the watchOS experience inside it.
Watch the Complete Process.
Choose the build you own or are considering. The Precision video shows the opening, fitting, closing, and release sequence in full. Follow the separate control and charging checks below as well.
Fit the Watch in the Right Order.
Identify your watch.
- Confirm the watch size and model against the case option.
- Remove the watch band using the watch's band-release mechanism.
Open and orient.
- Open the case using the method shown for your build.
- Check the watch orientation against the actual case openings.
Fit and check.
- Seat and close the fitting as demonstrated, without forcing it.
- Check the screen and physical controls before carrying.
Stop if the case or watch differs from the demonstration. Do not continue by applying more pressure.
Check the Orientation Before You Close It.
Check that the watch controls and the case openings line up with the correct-view photos for your build. If the fitting does not sit as shown, remove it using the demonstrated method and check the selected model again.
The circular feature on the case should not be assumed to control watchOS. Use only the controls demonstrated for your actual product.
Front and side views
Control side
Release detail
Rear view
CLASSIC
Classic Fitting
The supplier photograph shows the Classic release detail. It is not a full installation guide and does not establish charging clearance.
Find the release, not a screw.
The original Classic illustration identifies the red release slider and an arrow beside it. With the case supported on a table, move that slider in the marked direction to release the back. Do not undo the screws or pry at the edge.
This describes the release shown in the supplied illustration. If your case has a different latch, use its matching instructions.
The Case Changes the Carry. The Watch Provides the Features.
The case gives a compatible watch a handheld shape. It does not install apps, add a service plan, increase storage, or extend the battery.
Check the watch feature guide before relying on music, messages, Wallet, or other tools away from your phone. Handheld use also changes the conditions for wrist detection and features that need the watch to be worn.
Carry It Where the Product Is Designed to Go.
Check the closure before moving. Use a stable surface when setting the case down, and keep the screen and controls clear of loose objects in a pocket or bag.
Use it before or after movement when a glance would be distracting. Do not assume water, impact, sports, or protective ratings that are not stated for the case.
Charge and Remove It Without Guesswork.
Choose the instructions for your exact build before using a charger or opening the fitting. If your charger or case differs from the example, stop and ask support.
Start with the watch and its charger.
Use a charger suitable for your Apple Watch. Until in-case charging is confirmed for your exact case and charger, remove the watch using its build-specific release instructions and charge the watch separately.
Apple's charging guideSupport it before you release it.
Place the case on a stable surface and keep the watch supported while opening it. Follow the Precision video or the Classic release detail above. Stop if the fitting catches; do not lever the watch out.
Return to the demonstrationKeep the fitting clear.
Before closing, look for loose objects around the fitting and keep the screen and controls unobstructed. Follow the care instructions supplied with your case; no water or impact rating is claimed here.
Identify your watch firstBefore You Fit It.
Are the Classic and Precision instructions interchangeable?
No. Choose the guide for the build you have. Similar-looking cases may use different release or fitting steps.
Should I use force if the watch does not sit correctly?
No. Stop and check the model, size, orientation, and fitting guide. Contact support if the sample does not match what is shown.
Does fitting the watch change its software?
No. This is a physical case. Any supported app or connection still depends on the watch and its setup.
Will it work like a watch worn on the wrist?
Not in every respect. Read the feature guide for the off-wrist considerations before choosing a handheld setup for your intended use.